2005 2006 2007 2008 2009 2010 2011 2015 2016 2017 2018 aspnet azure csharp debugging docker elasticsearch exceptions firefox javascriptajax linux llblgen mongodb powershell projects python security services silverlight training videos wcf wpf xag xhtmlcss

NetFXHarmonics DevServer Released

Two months ago started work on a project to help me in my AJAX and SOA development.  What I basically needed was a development web server that allowed me to start up multiple web servers at once, monitor server traffic, and bind to specific IP interfaces.  Thus, the creation of NetFXHarmonics DevServer.  I built it completely for myself, but others started to ask for it as well.  When the demand for it became stronger, I realized that I needed to release the project on the web.  Normally I would host it myself, but given the interest from the .NET community, I thought I would put it on CodePlex.  I've only cried twice seen I've put it on CodePlex, but I'll survive.

NetFXHarmonics DevServer is a web server hosting environment built on WPF and WCF technologies that allows multiple instances of Cassini-like web servers to run in parallel. DevServer also includes tracing capabilities for monitoring requests and responses, request filtering, automatic ViewState and ControlState parsing, visually enhanced HTTP status codes, IP binding modes for both local-only as well as remote access, and easy to use XML configuration.

Using this development server, I am able to simultaneously start multiple web sites to very quickly view everything that happens over the wire and therefore easily debug JSON and SOAP messages flying back and forth between client and server and between services.  This tool have been a tremendous help for me in the past few months to discover exactly why my services are tripping out without having to enable WCF tracing.  It's also been a tremendous help in managing my own web development server instances for all my projects, each having 3-5 web sites (or segregated service endpoints) each.

Let me give you a quick run down of the various features in NetFXHarmonics DevServer with a little discussion of each feature's usage:

XML Configuration

NetFXHarmonics DevServer has various projects (and therefore assemblies) with the primary being DevServer.Client, the client application which houses the application's configuration.

In the app.config of DevServer.Client, you have a structure that looks something like the following:


This is where all your configuration lives and the various parts of this will be explained in their appropriate contexts in the discussions that follow.

Multiple Web Site Hosting

In side of the jampad.devServer configuration section in the app.config file, there is a branch called <servers /> which allows you to declare the various web servers you would like to load.  This is all that's required to configure servers.  Each server requires a friendly name, a port, a virtual path, and the physical path.  Given this information, DevServer will know how to load your particular servers.

  <server key="SampleWS1" name="Sample Website 1" port="2001"
          virtualPath="/" physicalPath="C:\Project\DevServer\SampleWebsite1">
  <server key="SampleWS2" name="Sample Website 2" disabled="true" port="2003"
          virtualPath="/" physicalPath="C:\Project\DevServer\SampleWebsite2">

If you want to disable a specific server from loading, use the "disabled" attribute.  All disabled servers will be completely skipped in the loading process.  On the other hand, if you would like to load a single server, you can actually do this from the command line by setting a server key on the <server /> element and by accessing it via a command line argument:

DevServer.Client.exe -serverKey:SampleWS1

In most scenarios you will probably want to load various sets of servers at once.  This is especially true in properly architected service-oriented solutions.  Thus, DevServer includes a concept of startup profiles.  Each profile will include links to a number of keyed servers.  You configure these startup profiles in the <startupProfiles /> section.

<startupProfiles activeProfile="Sample">
  <profile name="Sample">
    <server key="SampleWS1" />
    <server key="SampleWS2" />

This configuration block lives parallel to the <servers /> block and the inclusion of servers should be fairly self-explanatory.  When DevServer starts it will load the profile in the "activeProfile" attribute.  If the activeProfile block is missing, it will be ignored.  If the activeProfile states a profile that does not exist, DevServer will not load.  When using a startup profile, the "disabled" attribute on each server instance is ignored.  That attribute is only for non-startup profile usage.  An activeProfile may also be set via command line:

DevServer.Client.exe -activeProfile:Sample

This will override any setting in the activeProfile attribute of <startupProfiles/>.  In fact, the "serverKey" command line argument overrides the activeProfile <startupProfiles /> attribute as well.  Therefore, the order of priority is is as follows: command line argument override profile configuration and profile configuration overrides the "disabled" attribute.

Most developers don't work on one project and with only client.  Or, even if they do, they surely have their own projects as well.  Therefore, you may have even more servers in your configuration:

<server key="ABCCorpMainWS" name="Main Website" port="7001"
        virtualPath="/" physicalPath="C:\Project\ABCCorp\Website">
<server key="ABCCorpKBService" name="KB Service" port="7003"
        virtualPath="/" physicalPath="C:\Project\ABCCorp\KnowledgeBaseService">
<server key="ABCCorpProductService" name="Product Service" port="7005"
        virtualPath="/" physicalPath="C:\Project\ABCCorp\ProductService">

These would be grouped together in their own profile with the activeProfile set to that profile.

<startupProfiles activeProfile="ABCCorp">
  <profile name="ABCCorp">
    <server key="ABCCorpMainWS" />
    <server key="ABCCorpKBService" />
    <server key="ABCCorpProductService" />
  <profile name="Sample">
    <server key="SampleWS1" />
    <server key="SampleWS2" />

What about loading servers from different profiles?  Well, think about it... that's a different profile:

<startupProfiles activeProfile="ABCCorpWithSampleWS1">
  <profile name="ABCCorpWithSampleWS1">
    <server key="SampleWS1" />
    <server key="ABCCorpMainWS" />
    <server key="ABCCorpKBService" />
    <server key="ABCCorpProductService" />

One of the original purposes of DevServer was to allow remote non-IIS access to development web sites.  Therefore, in DevServer you can use the <binding /> configuration element to set either "loopback" (or "localhost") to only allow access to your machine, "any" to allow web access from all addresses, or you can specific a specific IP address to bind the web server to a single IP address so that only systems with access to that IP on that interface can access the web site.

In the following example the first web site is only accessible by the local machine and the second is accessible by others.  This comes in handy for both testing in a virtual machine as well as quickly doing demos.  If your evil project manager (forgive the redundancy) wants to see something, bring the web site up on all interface and he can poke around from his desk and then have all his complains and irrational demands ready when he comes to your desk (maybe you want to keep this feature secret).

<server key="SampleWS1" name="Sample Website 1" port="2001"
        virtualPath="/" physicalPath="C:\Project\DevServer\SampleWebsite1">
  <binding address="loopback" />
<server key="SampleWS2" name="Sample Website 2" port="2003"
        virtualPath="/" physicalPath="C:\Project\DevServer\SampleWebsite2">
  <binding address="any" />

Web Site Settings

In addition to server configuration, there is also a bit of general configuration that apply to all instances.  As you can see from the following example, you can add default documents to the existing defaults and you can also setup content type mappings.  A few content types already exist, but you can override as the example shows.  In this example, where ".js" is normally sent as text/javascript, you can override it to go to "application/x-javascript" or to something else.

    <add name="index.jsx" />
    <add extension=".jsx" type="application/x-javascript" />
    <add extension=".js" type="application/x-javascript" override="true" />

Request/Response Tracing

One of the core features of DevServer is the ability to do tracing on the traffic in each server.  Tracing is enabled by adding a <requestTracing /> configuration element to a server and setting the "enabled" attribute to true.

<server key="SampleWS1" name="Sample Website 1" port="2001"
        virtualPath="/" physicalPath="C:\Project\DevServer\SampleWebsite1">
  <binding address="loopback" />
  <requestTracing enabled="true" enableVerboseTypeTracing="false" enableFaviconTracing="true" />

This will have request/response messages show up in DevServer which will allow you to view status code, date/time, URL, POST data (if any), response data, request headers, response headers, as well as parsed ViewState and Control state for both the request and response.  In addition, each entry is color coded based on it's status code.  Different colors will show for 301/302, 500+, and 404.


When working with the web, you don't always want to see every little thing that happens all the time.  Therefore, by default, you only trace common text specific file like HTML, CSS, JavaScript, JSON, XAML, Text, and SOAP and their content.  If you want to trace images and other things going across, then set "enableVerboseTypeTracing" to true.  However, since there is no need to see the big blob image data, the data of binary types are not sent to the trace viewer even with enableVerboseTypeTracing.  You can also toggle both tracing as well as verbose type tracing on each server as each is running.

There's also the ability to view custom content types without seeing all the images and extra types.  This is the purpose of the <allowedConntetTypes /> configuration block under <requestTracing />, which is parallel to <servers />.

    <add value="application/x-custom-type" />

In this case, responses of content-type "application/x-custom-type" are also traced without needing to turn on verbose type tracing.

However, there is another way to control this information.  If you want to see all requests, but want the runtime ability to see various content types, then you can use a client-side filter in the request/response list.  In the box immediately above the request/response list, you can type something like the following:


Filtering will occur as you type, allowing you to find the particular request you are looking for.  The filter is NOT case sensitive.  You can also clear the request/response list with the clear button.  There is also the ability to copy/paste the particular headers that you want from the headers list by using typical SHIFT (for range) and CTRL-clicking (for single choosing).

Request/Response monitoring actually goes a bit further by automatically parsing both ViewState and ControlState for both request (POST) and response data.  Thanks goes to Fritz Onion for granting me permission to use his ViewState parser class in DevServer.

As a Training Tool

When announce any major project I always provide an "as a training tool" section to explain how the project can be used for personal training.  NetFXHarmonics DevServer is built using .NET 3.5 and relies heavily on LINQ and WCF with a WPF interface.  It also uses extensive .NET custom configuration for all server configuration.  In terms of LINQ, you can find many examples of how to use both query expression syntax and extension method syntax.  When people first learn LINQ, they think that LINQ is an O/R mapper.  Well, it's not (and probably shouldn't be usef for that in enterprise applications! there is only one enterprise class O/R mapper: LLBLGen Pro).  LINQ allows Language INtegrated Query in both C# and VB.  So, in DevServer, you will see heavy reliance on LINQ to search List<T> objects and also to transform LINQ database entities to WCF DTOs.

DevServer also relies heavily on WCF for all inner-process communication via named-pipes.  The web servers are actually hosted inside of a WCF service, thus segregating the web server loader from the client application in a very SOA friendly manner.  The client application loads the service and then acts as a client to the service calling on it to start, stop, and kill server instances.  WCF is also used to communicate the HTTP requests inside the web server back to the client, which is itself a WCF service to which the HTTP request is a client.  Therefore, DevServer is an example of how you can use WCF to communicate between AppDomains.

The entire interface in DevServer is a WPF application that relies heavy on WPF binding for all visual information.  All status information is in a collection to which WPF binds.  Not only that all, but all request/response information is also in a collection.  WPF simply binds to the data.  Using WPF, no eventhandling was required to say "on a click event, obtain SelectedIndex, pull data, then text these TextBox instances".  In WPF, you simply have normal every day data and WPF controls bind directly to that data being automatically updated via special interfaces (i.e INotifyPropertyChanged and INotifyCollectionChanged) or the special generic ObservableCollection<T>.

Since the bindings are completely automated, there also needs to be ways to "transform" data.  For example, in the TabItem header I have a little green or red icon showing the status of that particular web server instance.  There was no need to handle this manually.  There is already a property on my web server instance that has a status.  All I need to do is bind the image to my status enumeration and set a TypeConverter which transforms the enumeration value to a specific icon.  When the enumeration is set to Started, the icon is green, when it says "Stopped", the icon is red.  No events are required and the only code required for this scenario is the quick creation of a TypeConverter.

Therefore, DevServer is an example of WPF databinding.  I've heard people say that they are more into architecture and WCF and therefore have no interested in learning WPF.  This statement makes no sense.  If you don't want to mess with UI stuff, you need to learn WPF.  Instead of handing events all over the place and manually setting data, you can do whatever it is you do and have WPF just bind to your data.  When it comes to creating quick client applications, WPF is a much more productive platform than Windows Forms... or even the web!


Extremely Misunderstood Software

Today I was thinking about some of the misunderstandings going around about software. Actually my life revolves around misunderstandings in every area of my life (not just my life in technology!) and I'm usually thinking about it in some respect. I can recall back to early 2004 when I was the black sheep in both the Microsoft AND Mozilla communities for promoting .NET *and* web standards. The Mozilla-ish (open-source) guys would mock the severe inefficiencies and painful security flaws of .NET (though they never ACTUALLY used .NET!) and the Microsoft-ish (.NET) guys would mock call me personally unrepeatable names for even suggesting that web developers should learn the foundational principles of JavaScript, CSS, and XHTML before they starting asking a load of "how do I..." questions. Now while the open-source community has wised up a bit, I still get extremely vile insults from the git-r-done areas .NET community where even mentioning proper development or training will get you killed. In any case, this is my life and like I say... not just in technology. Basically, everyone hates me :)

So, here's my concise (yeah like I'm capable of that) list of software that is EXTREMELY misunderstood. I'm not going to go into any detail except put a single line by the item which should give you a hint as to what the software really is. This is important: if you understand one of the confusions, that confusion is analogous to each of the others. For example, if you know how insane it is to compare SQL Server 2005 to MySQL then, guess what... you now understand why it's insane to compare Firefox to IE or LLBLGen Pro to .netTiers or NHibernate. You just can't do it! Yet, people all day long give me unjustifiable grief about this stuff and I am forced to spend literally 70% of my time in marketing instead of programming!

I'll shut up now... here's the list:

List of Extremely Misunderstood Software

Introductory 3D WPF Video Demo

The other night I remembered a video I recorded around July 2006 about 3D XAML development in WPF. I never publicly published the video as it wasn't really all that great, so I just used it for internal training.

The videos is an accelerated demo of how you can start using WPF's 3D functionality. There's some errata in the video, so don't go taking notes... just take it as a proof-of-concept and an overall how-to.

Here are the videos...

3D RSS XAML Demonstration

Here's a short application I wrote for a demo recently. This is a rather simple RSS application, but I created it in 3D in XAML using the February CTP of WinFX. Also, the code is self-sufficient. That is, you can use the below XAML declaration in XAMLPad.

The first thing to notice about this application is that the data is real. That is, the actually RSS information you are seeing on the screen is from a live RSS feed; this demonstrates XAML's XML data-binding capabilities. The next thing to notice is that the entire thing is on an angle. That's because this is all rendered in 3D. So, this also demonstrates using XAML in 3D. You should also notice the background. This is actually just a JPG on my website. There is no C#/VB.NET anywhere... it's all XAML. This demonstrates the power to skin objects. Finally, you should notice that the rendering has different font styles and sizes. This demonstrates how you can style controls... yes, controls. There's nothing fancy here. There isn't really a "3D TextBlock" or anything. A TextBlock is a TextBlock. I just so happen to be using it in 3D.

So, there are many things this demo demonstrates. I actually recorded a short video lesson on 3D XAML programming and I will be releasing it very soon. In the future I may have an entire series on 3D XAML programming.

      <XmlDataProvider x:Key="xmlData" Source="http://fxfeeds.mozilla.com/rss20.xml">
      <Style x:Key="rssTitle" TargetType="{x:Type TextBlock}">
        <Setter Property="FontSize" Value="24"/>
        <Setter Property="TextBlock.Foreground">
            <LinearGradientBrush StartPoint="0,0" EndPoint="0,1">
                <GradientStop Color="Blue" Offset="0"/>
                <GradientStop Color="Green" Offset="1"/>
      <Style x:Key="rssText" TargetType="{x:Type TextBlock}">
        <Setter Property="FontSize" Value="12"/>
        <Setter Property="Foreground" Value="Gray"/>
          <AmbientLight Color="White"></AmbientLight>
                Positions="-1, -1, 0  1, -1, 0  -1, 1, 0  1, 1, 0"
                TriangleIndices="2 0 1 3 2 1"
                TextureCoordinates="1 1 1 0 0 1 0 0"
                Normals="0,0,1 0,0,1 0,0,1 0,0,1">
                    <VisualBrush.Visual >
                        <ListBox ItemsSource="{Binding Source={StaticResource xmlData}, XPath=rss/channel/item}">
                            <ImageBrush ImageSource="http://davidbetz.net/kansas/xamlimage.jpg"></ImageBrush>
                                <TextBlock Text="{Binding XPath=title}" Style="{StaticResource rssTitle}"></TextBlock>
                                <TextBlock Text="{Binding XPath=description}" Style="{StaticResource rssText}"></TextBlock>